|
|
 |
|
 |
|
|
|
|
The tape-less, clamp-less
and vacuum-less way to hold your work piece!
Our Fat-Mat will secure materials such as plastic, brass, acrylic, marble,
aluminum and more for fast and effective engraving and lasering
applications. |
|
 |
|
| |
|
|
|
|
|
|
| |
|
Fat-Mat sizes available: |
|
Item# |
Sizes |
|
FMAT01 |
5x7in/13x18cm |
|
FMAT02 |
8x12in/20x30cm |
|
FMAT03 |
9x12in/23x30cm |
|
FMAT04 |
12x12in/30x30cm |
|
FMAT05 |
13x13in/33x33cm |
|
FMAT06 |
12x16in/30x41cm |
|
FMAT07 |
12x24in/30x60cm |
|
FMAT08 |
24x24in/60x60cm |
| Custom Sizes
Available Upon Request |
|
|
|
| |
Fat-Mat Instructions:
|
| |
1)
Clean your engraving table of dust, oils, engraving
chips, etc.
2) Adjust your spindle travel to
allow for depth of mat.
3) Optional: Lay a strip of low
tack Double-surfaced tape on your table.
4) Place Fat-Mat, acrylic side
down, on tape or table.
5) Place engraving material on top
of Fat-Mat and begin engraving.
6) Remove engraving material from
mat and repeat process.
7) Clean Fat-Mat regularly with
rubbing alcohol and a lint-free cloth. This helps
keep your mat in its original form and engraving to
the accurate depth.
8) Fat-Mat has a 9 to 12 month life
expectancy with proper care and daily cleaning.
Fat Mat Care Instructions:
Clean your Fat Mat with isopropyl rubbing alcohol
70% (found at your local convenience store) and a
lint free cloth. After cleaning, your Fat Mat
will experience a restored tack level. |
|
|
| |
|
|
|
| |
|
|
| |
|
|
|
|
|
